Bethania Garage Inc. & Hard Dog Fabrication Hard Dog Fabrication Logo
  Home > Hard Dog Roll Bars > Miata > Installation Instructions
       
     
Deuce/Ace Installation Instructions

 

HARDWARE KIT:

Upper Mounting Plate:

  • 2 - 7/16" (11mm) X 2.25" bolts
  • 2 - 7/16" lock nuts
  • 2 - 7/16" flat washers
  • 2 - 2" spacers
  • 2 - 7/16" trim cap mounting washers
  • 2 - plastic trim caps

 

Foot Plate Mounting:

  • 2 - upper front back-up plates
  • 2 - lower front back-up plates
  • 2 - rear brace back-up plates
  • 14 - 3/8" x 1.25" bolts
  • 14 - 3/8" lock nuts
  • 28 - 3/8" flat washers

 

TOOLS NEEDED:

  • safety glasses
  • wrenches
    • 16mm or 5/8"
    • '94 & later - 17mm or 11/16"
    • 2 - 9/16"
    • 10mm
  • ratchet w/ 3" extension and 11/16" socket
  • hack saw or aviation snips for cutting package shelf and interior panel
  • #2 phillips head screwdriver
  • drill w/ 3/8" & 7/16" drill bits
  • jack and jack stands
  • belt sander or half round file for fitting plastic interior panels

Hardtop and ABS only:

  • t-40 torx drive for removable hard top latches
  • 3/4" hole saw for abs harness relocation

 

Next >>

WARNING: This article is sold without warranty, expressed or implied. No warranty is made to this product's ability to protect the user from any injury or death. The user assumes that risk.

Updated September 3, 2007 9:42 AM

     
Bethania Garage Inc. & Hard Dog Fabrication